Network Analyzers usati/ricondizionati
|
Strumento |
Descrizione: |
valore tipico di mercato iva esclusa |
 |
300KHz to 6GHz Vector Network Analyzer with option 002 (Harmonic Measurement Capability), 006 (6GHz Receiver option) and 010 (Time Domain Capability). Calibrated with certificate. |
4290,00 |
 |
30KHz to 6GHz Vector Network Analyzer with option 002 (Harmonic Measurement Capability), 006 (6GHz), 010 (Time Domain Capability) and 1D5 (High Stability Frequency Reference), Calibrated with certificate. |
9385,00 |
 |
300KHz to 3.6GHz including R3961B S-parameter test set and cables |
4175,00 |
 |
1 to 1500MHz 75 ohm Scalar Network Analyzer System. Have GPIB interface. Includes 5400-6NF75 SWR Autotester and 5400-71N75L RF detector - both 1-3000MHz |
2000,00 |
 |
1-1000Mhz 75 ohm RF detector with BNC test port | 172,00 |
 |
1-1000Mhz 75 ohm SWR autotester with BNC test port | 230,00 |
 |
DC to 2650MHz Vector Signal Analyzer with option:1C2 / HP Instrument BASICAYA / Vector Modulation AnalysisAY8 / Internal RF SourceAY9 / Extend Time Capture to 1Msample- Late Agilent brand name from week 31 in 1999. Comes calibrated. |
5785,00 |
 |
S-Parameter Test Set, 75 Ohms, 300 kHz to 2 GHz. |
835,00 |
|
|
S-Parameter Test Set, 50 Ohms, 300 kHz to 3 GHz. |
1770,00 |
|
|
S-Parameter Test Set, 50 Ohms, 300 kHz to 6 GHz. |
3025,00 |
 |
Cal Kit 3.5mm DC-26,5GHz i wooden box |
1440,00 |
 |
2-port RF ECal Module 85092-60001 with option 00A (N f-f and Nm-m adapters), 30 KHz to 6 GHz, in wooden box with wrench |
1000,00 |
|
|
2-port RF ECal Module 85092-60003, 30 KHz to 6 GHz, in wooden box |
1035,00 |
 |
2-port RF ECal Module 85093-60008 with option M0F, 300KHz to 9 GHz, in wooden box with wrench |
1800,00 |
 |
4-port RF ECal Module, 30 kHz to 6 GHz |
1585,00 |
 |
Type N Calibration Kit (open/short, load) in wooden box, DC-6GHz | 569,00 |
 |
Portable cable and antenna SWR/loss tester, 25MHz to 3.3GHz, complete accessories set included. |
1800,00 |
 |
S330 portable SWR/loss tester, 700MHz to 3.3GHz. No battery operation | 920,00 |
 |
Noise Figure Analyzer, 10MHz to 1.5GHz |
1080,00 |
|
|
Noise Figure Analyzer, 10MHz to 1.5GHz. |
1800,00 |
|
|
Noise Figure Analyzer, 10MHz to 2.047GHz. With option 020. Late unit from 98. |
2535,00 |
|
|
Noise Figure Test Set. Extent the frequency range of 8970B to 26.5GHz with external generator. |
2535,00 |
 |
Noise source 10MHz to 18GHz, 3.5mm connector, New/unused in wooden box |
1713,00 |
 |
Programmable Noise Generator. 1MHz to 2GHz. With option 01 (N connector output) and 03 (0-127.9dB noise attenuator in 0.1dB step) |
2000,00 |
|
le foto sono indicative potrebbero non rappresentare il prodotto in oggetto ed il suo stato di conservazione. |
Il prezzo può variare in funzione dello stato dello strumento |
